 |
X-FineRework Series Rework System Packages |
How to choose the best Rework System Package which will
do what you need and will fit your budget?
- Choose from the table below the X-FineRework Series
which is suitable for you.
Each Series addresses different sizes of the boards, which you will
need to work on. X-letter in the Series indicates that instead of a
Pre-Heater Base you will have a base containing a Pre-heater and also
Built-in Hot Air Pencil, Iron and Vacuum Pick-up.
- Go to the next table containing the Series, which you
want, and select the exact combination of accessories which are the
best for you.
- Make a note of the complete X-FineRework ... ... Part
Number. This is Rework System Package that you need.
|
X-FineRework-6L Series Rework System for large, multilayer boards
with six independantly controlled preheating zones. |
Table 1: List of different Series of the X-FineRework
Units available for you.
This is base combination of our units to make new generation SMT
Rework/Repair system offers precise and accurate monitoring of process
temperatures at a working point on a PCB.
| X-FineRework Series |
 |
 |
 |
 |
 |
 |
 |
Your Choice of XK-Series Tool Holder and/or Illumination System |
| Please Choose base combination, which BEST
suites your needs |
Programmable, Intelligent SMT Rework/Repair
Unit with connections at the back. Just Patented in US, Japan and
Europe |
Digital PID Control SMT Rework/Repair Unit
with integrated Pre heater, Hot Air Pencil, Iron and vacuum Pick-up |
Digital, High Power PCB Pre-Heater for Rework of SMT Technology Boards, with very accurate six zone temperature control |
Digital, SMT High Power, Large Area Under
board Pre heater |
PCB Holder especially designed for this pre-heater to well support large boards |
Open Frame Board Holder with X Y micrometer
positioning of PCB for boards up to 14" wide |
Universal, Retractable Board Holder for boards
up to 12" wide |
| What it Contains |
FOCUS"X1" |
SMT-ServiCE |
X-1003 |
X-1001 |
XU-6 |
XU-5 |
XU-1S |
| X-FineRework-6L |
|
|
|
|
|
|
|
X |
| X-FineRework-LX |
|
|
|
|
|
|
|
X |
| X-FineRework-L |
|
|
|
|
|
|
|
X |
| X-FineRework-SX |
|
|
|
|
|
|
|
X |
| X-FineRework-S |
|
|
|
|
|
|
|
X |
All systems additionally include:
- Nozzle #107 - Nozzle XNB-27x27 for BGA225 Component
- XCB-1R - Cord connecting Focus "X" with
Pre-heater Based Rework System SMT-SerwiCE or Preheaters X-1000.
If you need any other, not listed combination, please contact
either the distributor or factory direct at: bokar@bomir.com. We will certainly
accommodate you and give you what you really need.
Please note that all X-KAR Subsystems are interchangeable. You
will be able to add later any other subsystem if you needed. E.g. Use
XK-4 instead of XK-2 or change manual lift for Auto-lift or interchange
SMT-ServiCE with X-1001 Pre-heater etc.
Optional and absolutely recommended accessories:
 |
XFR-Commander Control Software which brings X-FineRework to another level |
 |
X485-USB Converter A Converter which allows for connection of FOCUS "X" and SMT-ServiCE to a PC (Desktop or Laptop) to upgrade Firmware (if needed) and to control and program entire system from a PC. |
|
