 |
XIL-2 High Intensity, long life Illumination System |
The system was designed for XK-Series tool holders to provide focused
illumination at the place of rework. Properly illuminated PCB helps greatly to
position a component, inspect paste deposition and improve quality of the solder
joints after rework.
XIL-2 fits all X-KAR XK-Series Tool Holders manufactured after Jan 2004.
It does not occupy valuable bench space and can be installed in few minutes.
Features:
- Regulated distance from the board
- Full rotation, angle and forward-back adjustment of the illuminating
heads.
- High intensity white soft light
- Long life (min 50 000 hours)
System includes:
- Arms with illumination - arms mount on XK-Series tool holders
Technical Specifications:
| Input Voltage |
110-120, 220-240V AC |
| Power consumption |
Max. 2 VA |
| Weight |
1.1 lbs.
(0,5 kg) |
| System dimensions |
15.7"x5.9"x7.9"
(400 x 150 x 200 mm) |
| Packaged weight |
1,5 lbs.
(0,7 kg) |
Optional equipments:
- Power Supply X-AC1 for 115V or X-AC12 for 220-240V. Needed
when you have Pre-heater Based Rework System manufactured before October
2005).
- XCC-2L - Cord connecting XIL-2 with Pre-heater Based Rework
System SMT-SerwiCE or Preheaters X-1000 (only for systems manufactured after
October 2005).
Application:
XIL-2 attached to XK-3AL
To enhance efficiency and speed during placement or replacement of the
components using X-KAR Rework Equipment incorporating XK Holders.
|
