 |
X-FineRework-L Rework System for boards up to
14" wide |
X-FineRework-L is a Modular Digital PID Control SMT
Rework/Repair System with a Pre-heater. The system allows pre-setting of
exact temperature of air stream at the end of Hot Air Tool Nozzle. A
unique feature, user-adjustable offset, which compensates for
differences in nozzles and air flow settings, achieves the accuracy.
The unique, high performance of the unit is possible due to use of the
newest microprocessor technology and thorough programming of all control
and monitoring functions combined with PID temperature control of all
heaters.
- Profiling capabilities for time/ temperature settings and
digital monitoring of the rework process.
- State of the art microprocessor technology, thorough
programming, digital compensation of sensors non-linearity's and heat
loss at different temperatures.
- PID control of all heaters (accuracy and extended heaters'
life).
- User-adjustable offset for air stream temperature at the end
of the nozzle.
- Digital display of settings and actual parameters on a front
panel of Focus "X".
- Repeatability of the process from board to board (digital
storage of profiles and settings).
- Large area board holder with precise micrometer adjustments in
X and Y axis, which accommodates boards up to 14" wide
- Enhanced alignment of a part with pads on a board with precise
rotation of a top hot air/gas tool, which is mounted in a fine
adjustment rotation stage.
- Ease of use. Rework process controlled from Focus
"X" control panel. Focus "X" can be used separately
in hand mode.
- Large selection of standard, lightweight nozzles. Custom
nozzles are available upon request.
- Fully antistatic. Supplied with ESD grounding wire and a wrist
strap.
- Self contained air and vacuum sources.
- Solid and strong metal (not plastic) construction guaranteeing
long service life.
- Compatibility with all X-KAR Brand Rework Attachments and
Accessories (XIL-2 High Intensity, long life Illumination System,
XHT-1P Small Handle Hot Air Tool, XmP-1S Micro Print Head Set, XK-AL
Series Holders with Auto Lift at the end of reflow cycle, etc.).
| X-FineRework-L Series |
 |
 |
 |
 |
 |
 |
|
 |
| Please Choose base combination,
which BEST suites your needs |
- Programmable, Intelligent SMT Rework/Repair
Unit. Patented in US, Japan and Europe
- Digital, SMT High Power, Large Area Under
board Pre heater
- Open Frame Board Holder with X Y micrometer
positioning of PCB for boards up to 14" wide
|
Tool Stand with up/down Z axis
movement |
High Intensity, long life
Illumination System |
| with precise rotation, up/down and Auto Lift |
with precise rotation, up/down |
with Auto Lift |
|
| What it Contains |
FOCUS"X1" |
X-1001 |
XU-5 |
XK-3AL |
XK-3 |
XK-2AL |
XK-2 |
XIL-2 |
| X-FineRework-L-AL-IL |
X |
X |
X |
X |
|
|
|
X |
| X-FineRework-L-AL |
X |
X |
X |
X |
|
|
|
|
| X-FineRework-L-IL |
X |
X |
X |
|
X |
|
|
X |
| X-FineRework-L |
X |
X |
X |
|
X |
|
|
|
| X-FineRework-L2-AL-IL |
X |
X |
X |
|
|
X |
|
X |
| X-FineRework-L2-AL |
X |
X |
X |
|
|
X |
|
|
| X-FineRework-L2-IL |
X |
X |
X |
|
|
|
X |
X |
| X-FineRework-L2 |
X |
X |
X |
|
|
|
X |
|
All systems additionally include:
- Nozzle #107 - Nozzle XNB-27x27 for BGA225 Component
- XCB-1R - Cord connecting Focus "X" with
Pre-heater Based Rework System SMT-SerwiCE or Preheaters X-1000.
If you need any other, not listed combination, please contact
either the distributor or factory direct at: bokar@bomir.com. We will certainly
accommodate you and give you what you really need.
Please note that all X-KAR Subsystems are interchangeable. You
will be able to add later any other subsystem if you needed. E.g. Use
XK-4 instead of XK-2 or change manual lift for Auto-lift or interchange
SMT-ServiCE with X-1001 Pre-heater etc.
|
